**Problem #1:** 0.2640 g of sodium oxalate is dissolved in a flask and requires 30.74 mL of potassium permanganate (from a buret) to titrate it and cause it to turn pink (the end point).

The equation for this reaction is:

5Na_{2}C_{2}O_{4}(aq) + 2KMnO_{4}(aq) + 8H_{2}SO_{4}(aq) ---> 2MnSO_{4}(aq) + K_{2}SO_{4}(aq) + 5Na_{2}SO_{4}(aq) + 10 CO_{2}(g) + 8 H_{2}O(l)

(a) How many moles of sodium oxalate are present in the flask?

(b) How many moles of potassium permanganate have been titrated into the flask to reach the end point?

(c) What is the molarity of the potassium permanganate?

**Solution to (a):**

0.2640 g / 134.00 g/mol = 0.001970149 molto four sig figs, this would be 0.001970 mol (1970 happens to be the year the ChemTeam graduated from high school!)

**Solution to (b):**

From the balanced equation, the oxalate-permanganate molar ratio is five to two.0.001970149 mol oxalate times (2 mol permanganate / 5 mol oxalate) = 0.00078806 mol permanganate

to four sig figs, this is 0.0007881 mol

**Solution to (c):**

0.00078806 mol / 0.03074 L = 0.02564 M (to four sig figs)

**Problem #2:** Potassium dichromate is used to titrate a sample containing an unknown percentage of iron. The sample is dissolved in H_{3}PO_{4}/H_{2}SO_{4} mixture to reduce all of the iron to Fe^{2+} ions. The solution is then titrated with 0.01625 M K_{2}Cr_{2}O_{7}, producing Fe^{3+} and Cr^{3+} ions in acidic solution. The titration requires 32.26 mL of K_{2}Cr_{2}O_{7} for 1.2765 g of the sample.

(a) Balance the net ionic equation using the half-reaction method.

(b) Determine the percent iron in the sample.

(c) Is the sample ferrous iodate, ferrous phosphate, or ferrous acetate?

**Solution to (a):**

6Fe^{2+}+ Cr_{2}O_{7}^{2}¯ + 14H^{+}---> 6 Fe^{3+}+ 2Cr^{3+}+ 7H_{2}OThe mechanics of balancing is left to the reader.

The key point is the ferrous ion-dichromate molar ratio, which is six to one.

**Solution to (b):**

1) Determine Fe(II) in solution:

(0.01625 mol/L) (0.03226 L) = 0.000524225 mol dichromate0.000524225 mol times (6 mol Fe(II) / 1 mol dichromate) = 0.00314535 mol Fe(II)

0.00314535 mol Fe(II) times 55.845 g/mol = 0.175652 g

2) Determine percent of iron in the sample:

0.175652 g / 1.2765 g = 13.76%

**Solution to (c):**

Which compound contains 13.76% iron? The only way to determine this is to calculate the percent composition of the three sbstances.

Ferrous iodate:

Fe(IO_{3})_{2}% Fe: 55.845 g/mol divided by 405.67 g/mol = 13.77%

I think we have a winner!

Here's the percent composition calculator I used to calculate the three percent compositions. Here are the other two substances in the question:

Fe_{3}(PO_{4})_{2}= 46.87%Fe(C

_{2}H_{3}O_{2})_{2}= 32.11 %

**Problem #3:** A solution contains both iron(II) and iron(III) ions. A 50.0 mL sample of the solution is titrated with 35.0 mL of 0.00280 M KMnO_{4}, which oxidizes Fe^{2+} to Fe^{3+}. The permangante ion is reduced to manganese(II) ion. Another 50.0 mL sample of solution is treated with zinc metal, which reduces all the Fe^{3+} to Fe^{2+}. The resulting solution is again titrated with 0.00280 M KMnO_{4}, this time 48.0 mL is required. What are the concentrations of Fe^{2+} and Fe^{3+} in the solution?

**Solution:**

1) The stoichiometric relationship of permangante to Fe(II):

5Fe^{2+}+ 8H^{+}+ MnO_{4}¯ ---> 5 Fe^{3+}+ Mn^{2+}+ 4 H_{2}Ois five to one.

2) Calculate moles of Fe(II) reacted:

(0.00280 mol / L) (0.0350 L) = 0.000098 mol of MnO_{4}¯(0.0000980 mol Mn) (5 mol Fe / 1 mol Mn) = 0.000490 mol Fe(II)

3) Determine the TOTAL iron content:

(0.00280 mol / L) (0.0480 L) = 0.0001344 mol of MnO_{4}¯(0.0000980 mol Mn) (5 mol Fe / 1 mol Mn) = 0.000672 mol of total Fe

4) Determine Fe(III) in solution and its molarity:

0.000672 mol - 0.000490 mol = 0.000182 mol0.000182 mol / 0.050 L = 0.00364 M

5) Determine molarity of Fe(II):

0.000490 mol / 0.050 L = 0.0098 M

**Problem #4:** The quantity of antimony in a sample can be determined by an oxidation-reduction titration with an oxidizing agent. A 9.62 g sample of stibnite, an ore of antimony, is dissolved in hot, concentrated HCl(aq) and passed over a reducing agent so that all the antimony is in the form Sb^{3+}. The Sb^{3+}(aq) is completely oxidized by 43.70 mL of a 0.1250 M solution of KBrO_{3}. Calculate the amount of antimony in the sample and its percentage in the ore.

**Solution:**

1) Balance the equation (in acidic solution, remember the HCl from the problem statement):

The unbalanced equation for the reaction is:BrO_{3}¯(aq) + Sb^{3+}(aq) ---> Br¯(aq) + Sb^{5+}(aq)The balanced equation is:

6H^{+}(aq) + BrO_{3}¯(aq) + 3Sb^{3+}(aq) ---> Br¯(aq) + 3Sb^{5+}(aq) + 3H_{2}O(l)The key point is the bromate to Sb(III) molar ratio, which is one to three.

2) Determine the bromate used:

(0.1250 mol/L) (0.04370 L) = 0.0054625 mol bromate

3) Determine the Sb(III) that reacted:

0.0054625 mol bromate times (3 mol Sb(III) / 1 mol bromate) = 0.0163875 mol Sb(III)

4) Determine grams of antimony:

0.0163875 mol times 121.760 g/mol = 1.995342 gto three sig figs, this is 2.00 g

5) Calculate percent of antimony in the sample:

1.995342 g / 9.62 g = 20.7416 %to three sig figs, this is 20.7%

**Problem #5:** A rock sample is to be assayed for its tin content by an oxidation-reduction titration with I_{3}¯(aq). A 10.00 g sample of the rock is crushed, dissolved in sulfuric acid, and passed over a reducing agent so that all the tin is in the form Sn^{2+}. The Sn^{2+}(aq) is completely oxidized by 34.60 mL of a 0.5560 M solution of NaI_{3}. The balanced equation for the reaction is

I_{3}¯(aq) + Sn^{2+}(aq) ---> Sn^{4+}(aq) + 3I¯(aq)

Calculate the amount of tin in the sample and its mass percentage in the rock.

**Solution:**

1) Determine the amount of triiodide used:

(0.5560 mol/L) (0.03460 L) = 0.0192376 mol of I_{3}¯ reacted

2) Determine the Sn(II) that reacted:

the key point is the 1:1 molar ratio between triiodide and the stannous iontherefore, 0.0192376 mol of Sn(II) reacted

3) Calculate grams of tin(II) ion:

0.0192376 mol times 118.710 g/mol = 2.284 g (to four sig figs)

4) Calculate mass percentage:

2.284 g / 10.00 g = 22.84%

**Problem #6:** The amount of I_{3}¯(aq) in a solution can be determined by titration with a solution containing a known concentration of S_{2}O_{3}^{2}¯(aq) (thiosulfate ion). The determination is based on the balanced equation:

I_{3}¯(aq) + 2S_{2}O_{3}^{2}¯(aq) ---> 3I¯(aq) + S_{4}O_{6}^{2}¯(aq)

Given that it requires 36.40 mL of 0.3300 M Na_{2}S_{2}O_{3}(aq) to titrate the I_{3}¯(aq) in a 15.00 mL sample, calculate the molarity of I_{3}¯(aq) in the solution.

**Solution:**

1) Determine the amount of thiosulfate used:

(0.3300 mol/L) (0.03640 L) = 0.012012 mol of thiosulfate

2) Determine triiodide that reacts:

from the balanced equation, the molar ratio between triiodide and thiosulfate is:one to twotherefore:0.012012 mol of thiosulfate times (1 mol triiodide / 2 mol thiosulfate) = 0.006006 mol triiodide

3) Determine molarity:

0.006006 mol / 0.01500 L = 0.4004 M (to 4 sig figs)

**Problem #7:** The amount of Fe^{2+}(aq) in an FeSO_{4}(aq) solution can be determined by titration with a solution containing a known concentration of Ce^{4+}(aq). The determination is based on the reaction

Fe^{2+}(aq) + Ce^{4+}(aq) ---> Fe^{3+}(aq) + Ce^{3+}(aq)

Given that it requires 37.50 mL of 0.09650 M Ce^{4+}(aq) to oxidize the Fe^{2+}(aq) in a 35.00 mL sample to Fe^{3+}(aq), calculate the molarity of Fe^{2+}(aq) and the number of milligrams of iron in the sample.

**Solution:**

1) Determine the amount of Ce(IV) that reacts:

(0.09650 mol/L) (0.03750 L) = 0.00361875 mol

2) Determine amount of iron(II) ion that reacts:

There is a 1:1 molar ratio between Fe(II) and Ce(IV), therefore:0.00361875 mol of Fe(II) reacts

3) Determine molarity:

0.00361875 mol / 0.03500 L = 0.1034 M (to four sig figs)

4) Determine milligrams:

0.00361875 mol times 55.845 g/mol = 0.2021 g = 202.1 mg

**Problem #8:** A solution of I_{3}¯(aq) can be standardized by using it to titrate As_{4}O_{6}(aq). The titration of 0.1021 g of As_{4}O_{6}(s) dissolved in 30.00 mL of water requires 36.55 mL of I_{3}¯(aq). Calculate the molarity of the I_{3}¯(aq) solution. The unbalanced equation is

As_{4}O_{6}(s) + I_{3}¯(aq) ---> As_{4}O_{10}(s) + I¯(aq)

**Solution:**

1) Balance the equation:

4H_{2}O + As_{4}O_{6}(s) + 4I_{3}¯(aq) ---> As_{4}O_{10}(s) + 12I¯(aq) + 8H^{+}See a discussion concerning this equation at the end of the solution.

2) Determine how many moles of As_{4}O_{6} reacted:

0.1021 g divided by 395.6828 g/mol = 0.000258035 mol

3) Determine moles of triiodide that react:

the molar ratio between As_{4}O_{6}and I_{3}¯ is:one to fourtherefore:0.000258035 mol As_{4}O_{6}times (4 mol I_{3}¯ / 1 mol As_{4}O_{6}) = 0.00103214 mol

4) Calculate the molarity:

0.00103214 mol / 0.03655 L = 0.02824 M (to four sig figs)

Comment: the actual reactions are different from the equation presented above. They can be viewed here.

Please note that four H_{3}AsO_{4} would be produced from one As_{4}O_{6}. However, to produce one As_{4}O_{10} would require four H_{3}AsO_{4}. So the above equation, while not showing the actual chemical reactions, does accurately represent the ratio (which is 1:4) between As_{4}O_{6} and triiodide.

**Problem #9:** A 32.15 mL sample of a solution of MoO_{4}^{2}¯(aq) was passed through a Jones reductor (a column of zinc powder) in order to convert all the MoO_{4}^{2}¯(aq) to Mo^{3+}(aq). The filtrate required 20.85 mL of 0.09550 M KMnO_{4}-(aq) for the reaction given by

MnO_{4}¯(aq) + Mo^{3+}(aq) ---> Mn^{2+}(aq) + MoO_{2}^{2+}(aq)

Balance this equation and then calculate the concentration of the original MoO_{4}^{2}¯(aq) solution.

**Solution:**

1) Balance the equation:

the balanced half-reactions:5e¯ + 8H^{+}+ MnO_{4}¯(aq) ---> Mn^{2+}(aq) + 4H_{2}O(l)

2H_{2}O + Mo^{3+}(aq) ---> MoO_{2}^{2+}(aq) + 4H^{+}+ 3e¯the balanced equation:

4H^{+}+ 3MnO_{4}¯(aq) + 5Mo^{3+}(aq) ---> 3Mn^{2+}(aq) + 5MoO_{2}^{2+}(aq) + 2H_{2}O

2) Calculate the moles of permanganate required:

(0.09550 mol/L) (0.02085 L) = 0.001991175 mol

3) Calculate moles of the molybdate:

the key point is the molar ratio between permanganate and molybdate, which is:three to fivetherefore:

0.001991175 mol permanganate times (5 mol molybdate / 3 mol permanganate = 0.003318625 mol molybdate

4) Calculate the concentration:

0.003318625 mol / 0.03215 L = 0.1032 M (to four sig figs)

**Problem #10:** An ore is to be analyzed for its iron content by an oxidation-reduction titration with permanganate ion. A 4.230 g sample of the ore is dissolved in hydrochloric acid and passed over a reducing agent so that all the iron is in the form Fe^{2+}. The Fe^{2+}(aq) is completely oxidized by 31.60 mL of a 0.05120 M solution of KMnO_{4}. The unbalanced equation for the reaction is

KMnO_{4}(aq) + HCl(aq) + FeCl_{2}(aq) ---> MnCl_{2}(aq) + FeCl_{3}(aq) + H_{2}O(l)

Calculate the amount of iron in the sample and its mass percentage in the ore.

**Solution:**

1) The unbalanced, net ionic equation is:

MnOthe balanced equation is:_{4}¯ + Fe^{2+}---> Mn^{2+}+ Fe^{3+}

8H^{+}+ MnO_{4}¯ + 5Fe^{2+}---> Mn^{2+}+ 5Fe^{3+}+ 4H_{2}O

2) Calculate moles of permanganate:

(0.05120 mol/L) (0.03160 L) = 0.00161792 mol

3) Determine the amount of Fe(II) that reacted:

the molar ratio for the reaction of permanganate and Fe(II) is:one to fivetherefore:0.00161792 mol permanganate times (5 mol iron(II) / 1 mol permanganate) = 0.0080896 mol iron(II)

4) Calculate grams of iron in sample, then its mass percentage:

0.0080896 mol iron(II) times 55.845 g/mol = 0.4518 g (to four sig figs)0.4517637 g / 4.230 g = 10.68%

**Problem #11:** 10.0 cm^{3} of 0.10 mol dm^{-3} aqueous iron(II) sulfate is titrated against 0.025 mol dm^{-3} aqueous potassium manganate(VII) in the presence of an excess of both hydrogen ions and fluoride ions. It is found that exactly 10.0 cm^{3} of the manganate(VII) solution is required to reach end point. What is the oxidation number of the manganese at the end point? (Warning from the ChemTeam: be sure to read commentary at the end of the solution.)

**Solution:**

1) Determine how much Fe^{2+} is present:

(0.10 mol/L) (0.0100 L) = 0.0010 mol

2) Determine how much MnO_{4}¯ reacted:

(0.025 mol/L) (0.0100 L) = 0.00025 mol

3) Calculate the number of Fe^{2+} oxidized per one MnO_{4}¯ reduced:

0.0010 mol / 0.00025 mol = 4

4) Conclusion:

Mn is reduced from +7 to +3

Comment: this is a problem with a fake answer. Under the chemical circumstances specified, manganese would be reduced to Mn^{2+}. This problem is deliberately set up to catch a "quickie" answer by the student who knows that, in the real world, the Fe goes +2 to +3 and the Mn goes from +7 to +2.

Part of the real world underlying this problem is the knowledge that Mn, being at its highest oxidation state, can only be reduced. Therefore, the Fe must be oxidized and, based on real world knowledge, it can only go from +2 to +3.

Consequently, we can reason that the Mn goes down 4 in its oxidation number.

**Problem #12:** Someday!